Three common problems of laser cutting in the processing of carbon steel
Laser cutting machines are widely used in the field of carbon steel processing because of their excellent performances such as fast, efficient, high quality and high yield. However, due to the lack of understanding of laser cutting machines, many users may encounter various problems during use, which affects the normal operation and cutting quality of laser cutting machines. The following are three common problems and corresponding solutions for everyone.
1. When laser cutting carbon steel, burrs appear on the processed parts
1) The laser focus position shifts, do the focus position test and adjust according to the laser focus shift amount;
2) The output power of the laser is not enough, you need to check whether the laser generator is working properly. If it is normal, observe whether the output value of the laser control button is correct, and adjust it if it is incorrect;
3)The cutting line speed is too slow, you need to increase the line speed during operation control;
4) The purity of the cutting gas is not enough, and it is necessary to provide high-quality cutting working gas;
5) Instability that occurs when the machine tool is running for too long. At this time, it needs to be shut down and restarted.
The reason why the laser is not completely cut:
1) The choice of laser nozzle does not match the thickness of the processing board, replace the nozzle or processing board;
2) Laser cutting line speed is too fast, need to control the operation to reduce the line speed.
3) Abnormal sparks appear when cutting low carbon steel
When normally cutting low-carbon steel, the fire bouquet is long and flat, with few forks. The occurrence of abnormal sparks will affect the smoothness and processing quality of the cut section of the processed parts.
At this time, when the other parameters are normal, the following situations should be considered:
1)The laser head nozzle is seriously worn, and the nozzle should be replaced in time;
2) In the case of no new nozzle replacement, the pressure of the cutting working gas should be increased;
3) If the thread at the connection between the nozzle and the laser head is loose, the cutting should be suspended immediately, check the connection status of the laser head, and re-thread
Our Service
Pre-sale:
(1)regarding your demands , the best suitable machine will be recommend you . the customized machine also support Steel Tube Cutter Table CNC Plasma Metal Cutting Machine
(2)regarding your country requirements, some certificates will supply to help you clearance. Like CE,CO, FORM-A,FORM-B,FORM-F,original certificate signed by Embassy.etc.
(3)all the machine will be tested before delivery, and we will take the video and pictures to you.when you receive it , it can work directly.
After-sales
(1)we will supply all the control system and software operate manual,so you can operate the machine easily refer it.
(2)All the machine problem , you can ask me any time , we will help you solve by online way ,or tel,email,remote video at first time ,if all these can't solve your problem , our engineer will go to your factory to help you on spot.
Welcome to our factory for learning how to operate machine ,one professional engineer will together with you , this service for free.
Guarantee:
2 years for whole machine , any parts except consumables broken regarding machine quality within one year,We will send you the parts for free.
All the service is for machine whole life Steel Tube Cutter Table CNC Plasma Cutting Machine
Aimee zheng
Email:Aimee@bogongcnc.com
Wbesit：www.bogongcnc.com
Whatsapp:008617615835024.
Jinan Bogong Machinery Co., Ltd