Laser welding machine switch machine steps
First, the preparation work before starting
1. Check the power supply of the laser welding machine and whether the water circulation is normal;
2. Check if the gas link of the equipment in the machine is normal;
3. Check the surface of the machine for no dust, spots, oil, etc.
Second, boot
1. Turn on the power and turn on the main power switch.
2. Open the water cooler, laser generator, etc. in sequence;
3. Open the argon valve to adjust the flow rate of the gas;
4. Enter the current working parameters to be executed.
5. Perform welding operations;
Third, shut down
1. Exit the program and turn off the laser generator;
2. Turn off the dust collector, water cooler and other equipment in order;
3. Close the argon valve;
4. turn off the main power switch
Aimee zheng
Email:Aimee@bogongcnc.com
Wbesit：www.bogongcnc.com
Whatsapp:008617615835024.
Jinan Bogong Machinery Co., Ltd
