Call Us Today! 0086-13964177675?|?sales@bogongcnc.com

How to choose the right laser marking machine

ART ONE: Fiber Laser Marking Machine

 

1.     Principle of fiber laser marking machine

 

Fiber laser marking machine uses a laser beam at the surface of a variety of materials with a permanent marker.

 

2.     XT LASER Fiber machine Includes desktop style and portable style

 

Desktop style includes normal desktop type (also called all-in-one type), detached type and sealed type (also called fiber laser marking machine with protective cover).

 

Portable style includes hand-held type, portable type and mini type.

 

3. Detail introduction of the each type

 bogong-fiber-laser-marking-machine.jpg

a.Desktop type

This type of machine sales well in the market, it is suitable for clients who want to mark small parts, because the height of lifting pillar is only 47cm. Different scope lens have different focus length, so we need to confirm the focus length of the laser machine.

Note: You can see the machine in the above picture. It does not have a 3D table, we can add it if clients need it.

If needed we can also change the height of the lifting pillar to 80cm. Doing so same machine then can be used to mark big products with high height.


b.Detached type

If clients wants to use big scope for marking, for example if they need scope lens of  300*300mm, then also clients needs to choose this all-in-one type cabinet, so we can give clients the machine with high lifting pillar.

detached type fiber laser marking machine

Detached machine will mostly be used for marking big products. It can be seen from the picture above that the machine have long lifting pillar\


c.Sealed type

laser-marking-machine3.jpg

Europe clients will mostly like to choose this type of machine, this type of machine has protective cover & electric lifting pillar, There is also one small window in front of the cabinet through which we can observe the marking process.

 

For the purpose of protection we have added one function i.e. the machine will not mark when the door is open, this also means marking is only possible when the door will be closed.

 

The height of box after packing the machine is about the 173cm, so when we have to ship by Air, we need to contact the freight forwarder to check if there is a big cargo plane to carry this machine.


Close
CHAT ONLINE