What kind of machines do I choose to Cutting metals? fiber cutting Machine or Plasma cutting Machine?

Plasma cutting Machine can be used to cut metal, from thin to thick plates (several millimeters or tens of millimeters), the slit is usually wider than the laser slit, and the heat input into the part is significantly higher, in some cases the cutting surface is rough .

Compared with Fiber laser Cutting Machine, plasma cutting Machine is generally considered to be a less accurate method of cutting sheet metal.

But what's the difference for this two Model Machine ?

1.Fiber Laser cutting machine and 2. Plasma cutting machine Both can cut thicker materials,

The difference between the two machines is

1. The laser cutting surface is smooth, the precision is relatively high, and the price is expensive.

2. The plasma machine cutting surface is not very smooth,the price is cheaper than the fiber cutting machine.

If you don't have a requirement for the edge of the process, you can choose plasma because it is cheaper than fiber laser machines.Or you can send some pictures for me of your samples, let's me help you analyze it.then choose the best suitable for you machine.

Next, let me introduce our plasma cutting machine. 

The advantages of our Plasma cutting Machine

1.We have been doing this production line for many years, with rich experience and professional knowledge, will let you get the most suitable machine with the correct configuration. This feature allows you to avoid many errors and avoid some troubles. Other factories often lack this experience, causing trouble for real customers.

2.If you use a plasma cutting machine to cut thick meat, you must use an arc height adjustment system, and our height adjustment system uses a high sensor, which can send 12,000 signals per minute, while other height adjustment systems usually send 10,000 per minute Signals, so our cutting quality is better than other factories, cutting speed is faster than the same power plasma light source

3.We are equipped with two fans for taking chips out of the room, the front fan will blow back, and the rear fan will exhaust smoke from the machine and out of the room. In this way, the efficiency will put the workshop in a good environment. Other factories do not have this fan or only one.

4.Our software has automatic correction function, that mean if the board put slant,

software can automatically correct, so that can effectively ensure good cutting results, if the large gantry cutting large sheet or precious plate, if no with this function, in case one parts bad cut, it will cause the whole metal sheet waste,this is a larger Loss; However, other manufacturers' machines do not have this feature. 

5.For the mechanical design of the machine tool, please design the machine tool designed by the professor of the physics department of the prestigious university. Each beam in the middle has a column to strengthen the support effect of the bed. For enlarged, thick and heavy metal plates, it can effectively prevent the middle part of the machine because The deformation of the machine tool caused by insufficient bearing capacity. However, in order to save material costs, many other manufacturers have omitted this part, resulting in deformation of the machine for a long time.

6.We can continue to provide consumables to customers, customers only need to pay the cost of parts, we will bear the cost of air freight. (Any quantity is fine)

The machine If you need our help,we will give you the best price support and service.

If you interesting in our Machine,Welcome to contact us

Aimee zheng

Email:Aimee@bogongcnc.com 

Wbesit：www.bogongcnc.com 

Whatsapp:008617615835024.

Jinan Bogong Machinery Co., Ltd